Kingston ValueRAM 32GB (4x8GB) 1333MHz DDR3 Non-ECC 240-Pin CL9 DIMM Server Memory Module
… FBGA components per module. Total kit capacity is 32GB. The SPD’s are programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers.ValueRAM, Kingston’s industry standard memory, delivers award-winning performance and legendary Kingston reliability. When you know what you want, you want ValueRAM.FeaturesJEDEC standard 1.5V (1.425V ~ 1.575V) Power SupplyVDDQ = 1.5V (1.425V ~ 1.575V)667MHz fCK for 1333Mb/sec/pin8 independent internal bankProgrammable CAS Latency: 9, 8, 7, 6Programmable Additive Latency: 0, CL – 2, or CL – 1 clockProgrammable CAS Write Latency(CWL) = 7 (DDR3-1333)8-bit pre-fetchBurst Length: 8 (Interleave without any limit, sequential with starting address ‘000’ only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]Bi-directional Differential Data StrobeInternal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)On Die Termination using ODT pinAverage Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°Asynchronous ResetPCB: Height 1.18 inch (30mm), double sided componentExtra InfoMemory Size: 32768MBModule Size: 8192MBMemory Type: DDR3Memory Package: DIMMPin Configuration: 240 pins
… FBGA components per module. Total kit capacity is 32GB. The SPD’s are programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers.ValueRAM, Kingston’s industry standard memory, delivers award-winning performance and legendary Kingston reliability. When you know what you want, you want ValueRAM.FeaturesJEDEC standard 1.5V (1.425V ~ 1.575V) Power SupplyVDDQ = 1.5V (1.425V ~ 1.575V)667MHz fCK for 1333Mb/sec/pin8 independent internal bankProgrammable CAS Latency: 9, 8, 7, 6Programmable Additive Latency: 0, CL – 2, or CL – 1 clockProgrammable CAS Write Latency(CWL) = 7 (DDR3-1333)8-bit pre-fetchBurst Length: 8 (Interleave without any limit, sequential with starting address ‘000’ only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]Bi-directional Differential Data StrobeInternal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)On Die Termination using ODT pinAverage Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°Asynchronous ResetPCB: Height 1.18 inch (30mm), double sided componentExtra InfoMemory Size: 32768MBModule Size: 8192MBMemory Type: DDR3Memory Package: DIMMPin Configuration: 240 pins
Reviews